The Revolver's contemporary styling makes it a real standout on the flight line. Once it's airborne, it
really takes center stage — and that's regardless of whether it's equipped with a glow engine or
brushless motor! Get ready to fire off one crowd-pleasing maneuver after another with the Revolver
— it's the "sports car" of sport aerobats!
really takes center stage — and that's regardless of whether it's equipped with a glow engine or
brushless motor! Get ready to fire off one crowd-pleasing maneuver after another with the Revolver
— it's the "sports car" of sport aerobats!
SPECIFICATIONS
Stock Number: GPMA1018
Wingspan: 59 in (1500 mm)
Wing Area: 563 in² (36 dm²)
RTF Weight: 6-7 lb (2720-3180 g)
Wing Loading: 25-29 oz/ft² (76-88 g/dm²)
Length: 48 in (1220 mm)
Requires: 4+ channel radio w/servos (50
oz-in min. torque)
Electric Motor Requirements: 800kV
brushless out-runner motor, 80A ESC, (2)
3200mAh 11.1V 20C LiPo packs, 11 x 5.5E
prop, large aluminum motor mount
Glow Engine Requirements: 2-stroke
.46-.55 cu in (7.5-9.0 cc) or 4-stroke .70 cu
in (11.5 cc) engine
Stock Number: GPMA1018
Wingspan: 59 in (1500 mm)
Wing Area: 563 in² (36 dm²)
RTF Weight: 6-7 lb (2720-3180 g)
Wing Loading: 25-29 oz/ft² (76-88 g/dm²)
Length: 48 in (1220 mm)
Requires: 4+ channel radio w/servos (50
oz-in min. torque)
Electric Motor Requirements: 800kV
brushless out-runner motor, 80A ESC, (2)
3200mAh 11.1V 20C LiPo packs, 11 x 5.5E
prop, large aluminum motor mount
Glow Engine Requirements: 2-stroke
.46-.55 cu in (7.5-9.0 cc) or 4-stroke .70 cu
in (11.5 cc) engine
On-board radio gear is quickly accessed
through this hatch. It also makes it easy
to change LiPo battery packs when
equipped with an ElectriFly™ brushless
power system.
through this hatch. It also makes it easy
to change LiPo battery packs when
equipped with an ElectriFly™ brushless
power system.
The bolt pattern on the firewall lines up
exactly for either a .46-.70 glow engine
mount or a motor mount for installing a
brushless out-runner motor.
exactly for either a .46-.70 glow engine
mount or a motor mount for installing a
brushless out-runner motor.
| $ 199.99 |
---Select balsa and ply are used for the fuselage and tail section; the 2-piece, plug-in wing
features a wire cut foam core that is balsa-sheeted.
---Airfoil-shaped tail surfaces allow the plane to lock in and track solidly.
---Comes with a complete package of quality Great Planes hardware.
features a wire cut foam core that is balsa-sheeted.
---Airfoil-shaped tail surfaces allow the plane to lock in and track solidly.
---Comes with a complete package of quality Great Planes hardware.
Only about 10 hours of final assembly
are required before your Revolver is
flight-ready.
The fiberglass cowl, wheelpants,
and landing gear are painted in
high gloss colors to match the
trim scheme.
are required before your Revolver is
flight-ready.
The fiberglass cowl, wheelpants,
and landing gear are painted in
high gloss colors to match the
trim scheme.
Not only does the clear canopy come
installed, it also has a great-looking
frame painted on it. You also get a
realistic-looking pilot figure.
Short and direct aileron linkages
deliver strong, accurate control
during high and low-speed flight.
installed, it also has a great-looking
frame painted on it. You also get a
realistic-looking pilot figure.
Short and direct aileron linkages
deliver strong, accurate control
during high and low-speed flight.
| Click on the thumbnails to see a larger picture of the Revolver in action. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |